Looking for lime plastering in Wolverhampton? We are traditional lime specialists covering West Midlands and the rest of West Midlands. Our work here ranges from black-and-white timber-framed houses to listed buildings and conservation-area homes, and every mix is chosen for the red sandstone we find behind the existing finish.
Damp in Wolverhampton homes is usually caused by the wrong material rather than a faulty building. Where cement render has been applied over red sandstone, stripping it back and re-rendering in lime normally resolves the damp within a single drying season.
The older parts of Wolverhampton are dominated by black-and-white timber-framed houses, sandstone cottages, industrial-era brick terraces. These are solid-wall constructions — there is no cavity, no damp-proof membrane and no vapour barrier — so the wall relies on evaporation through the plaster and render to stay dry.
Lime is flexible, breathable and self-healing. On Wolverhampton properties built from red sandstone, it moves with the building instead of cracking away from it, and it protects the masonry rather than the other way round.
You get a single point of contact from survey to final coat. We agree the specification for your Wolverhampton property in writing, prepare and apply the lime in the correct build-up, and advise on breathable decoration once the work has cured.
Every Wolverhampton property is surveyed individually, but these examples show the kind of West Midlands buildings and use-cases we are called to most often.
black-and-white timber-framed house — Blown gypsum plaster and tide marks on the ground floor of a black-and-white timber-framed house in West Midlands. We hacked off the gypsum, applied a haired lime base coat and a lime putty finish, and specified clay paint so the wall could keep drying.
canal-side warehouse conversion — Eroding masonry faces on a canal-side warehouse conversion in Wolverhampton caused by hard cement pointing. We raked out by hand to the correct depth and repointed in a soft lime mortar matched to the original aggregate and colour of the oak timber frame with wattle panels.
red sandstone cottage — Cracked and cement-patched panels on a red sandstone cottage in West Midlands. Failed infill was cut out, laths and staves renewed where rotten, and the panels made good in haired lime so the frame can move without splitting the finish.
Yes. We take samples of the surviving mortar or plaster from the oak timber frame with wattle panels first, then match aggregate, colour and texture so the repair blends into the original rather than patching over it.
It depends on the wall and its exposure. For most West Midlands work we use haired lime plaster on riven lath, with lime putty finishing coats, stepping up to a more hydraulic lime only where exposure or the substrate genuinely demands it.
Yes. We regularly work on listed and conservation-area properties across West Midlands and can supply mix specifications and sample panels for Wolverhampton conservation officers where consent is required.
Where damp is caused by trapped moisture in a solid wall — very common in older Wolverhampton properties — replacing cement or gypsum with lime allows the wall to dry out. We always identify the source of moisture during the survey before recommending work.
Yes, but it must be finished with a breathable product such as limewash, clay paint or mineral silicate paint. We advise on suitable finishes for each Wolverhampton project so breathability is not lost at the final coat.
Our lime plastering, render and pointing teams also cover these towns and cities close to Wolverhampton in West Midlands and the wider West Midlands area.
Browse all areas we cover across the UK
Get a lime plastering quote in Wolverhampton