We provide conservation-grade lime plastering across Crewe, Cheshire. Whether you are repairing damp internal walls in a red sandstone property, stripping failed cement render, or repointing stonework, our craftsmen work only in lime — the material Crewe's period buildings were originally constructed with.
Damp in Crewe homes is usually caused by the wrong material rather than a faulty building. Where cement render has been applied over red sandstone, stripping it back and re-rendering in lime normally resolves the damp within a single drying season.
Around Crewe you will find stone farmhouses and barns alongside later Georgian merchant houses. Both were built with lime, and both suffer when a modern impermeable finish is applied over the top — the moisture has to go somewhere, and it goes into the masonry and the timbers.
In the high rainfall and constant damp of the North West, an impermeable render is a liability: water gets in at cracks and reveals and then cannot leave. Lime render on a Crewe wall handles that water, releasing it back out through the surface instead of pushing it deeper into the structure.
Every Crewe job begins with diagnosis: identifying where moisture is entering before any plaster goes on. We then remove failed material, prepare the red sandstone, and build the lime up in coats, allowing each one to cure before the next.
Because high exposure means walls must shed water and dry quickly, Crewe throws up a particular set of problems. These are representative examples of how we resolve them in lime.
Lakeland stone farmhouse — Consented repairs to a listed Lakeland stone farmhouse in Cheshire. Sample panels were prepared for the conservation officer, mortar analysis informed the mix, and the historic surface was conserved and patched rather than replaced wholesale.
Georgian merchant house — A commercial Georgian merchant house on a Crewe high street within a conservation area. Decayed render and mouldings were reinstated in lime, run in situ to the original profiles, and finished to match neighbouring frontages.
slate-rubble barn conversion — Blown gypsum plaster and tide marks on the ground floor of a slate-rubble barn conversion in Cheshire. We hacked off the gypsum, applied a haired lime base coat and a lime putty finish, and specified clay paint so the wall could keep drying.
Yes. We regularly work on listed and conservation-area properties across Cheshire and can supply mix specifications and sample panels for Crewe conservation officers where consent is required.
Where damp is caused by trapped moisture in a solid wall — very common in older Crewe properties — replacing cement or gypsum with lime allows the wall to dry out. We always identify the source of moisture during the survey before recommending work.
Yes — stripping failed cement render and replacing it with a breathable lime render is one of the most common jobs we carry out in Crewe. It is usually the fastest way to resolve persistent damp in a solid-wall building.
Send us the details of your Crewe property through the contact form and we will arrange a free survey. You will receive a written specification and quote with no obligation to proceed.
Our lime plastering, render and pointing teams also cover these towns and cities close to Crewe in Cheshire and the wider North West England area.
Browse all areas we cover across the UK
Get a lime plastering quote in Crewe