Runcorn is an established Cheshire town, and its older buildings were put up long before modern materials arrived — high exposure means walls must shed water and dry quickly. Our Runcorn lime plastering team applies authentic lime plaster, external lime render and lime pointing so those walls stay dry, stable and original.
Many properties in and around Runcorn sit within conservation areas or carry listed status, so finishes must match the original construction. We work regularly with Cheshire conservation officers and typically specify hot-mixed lime render in three coats, roughcast or harled where exposure is severe.
Most of our Runcorn work involves red sandstone. In Cheshire that usually means stone farmhouses and barns and millworkers' terraces, where original lime plaster survives on lath internally and lime render or pointing protects the wall outside.
Using lime in Runcorn is a conservation requirement as often as a technical one. It keeps the property eligible for heritage consent, preserves original detailing, and gives a soft, hand-finished surface no modern board can replicate.
We start with a free survey at the property in Runcorn, opening up a small area where necessary to see the substrate. From there we specify the mix — usually hot-mixed lime render in three coats, roughcast or harled where exposure is severe — and issue a written quote covering preparation, coats, curing time and finish.
From stone farmhouses and barns to later solid-wall housing, here is the sort of lime plastering, render and pointing work we deliver in and around Runcorn.
millworkers' terrace — Peeling modern masonry paint on a millworkers' terrace in Cheshire. The impermeable coating was removed, minor render defects were patched in lime, and the elevations were finished in several thin coats of limewash.
Georgian merchant house — Weather-facing walls of a Georgian merchant house taking the full force of the high rainfall and constant damp of the North West. We specified hot-mixed lime render in three coats, roughcast or harled where exposure is severe, built the render up in generous coats and protected the work while it carbonated to avoid shrinkage cracking.
Victorian seaside guesthouse — A commercial Victorian seaside guesthouse on a Runcorn high street within a conservation area. Decayed render and mouldings were reinstated in lime, run in situ to the original profiles, and finished to match neighbouring frontages.
Every property is different, so we do not publish fixed prices. Cost depends on the substrate, the number of coats, access and whether failed cement has to be removed first. We survey the property in Runcorn and provide a written, no-obligation quote.
Lime cures slowly by carbonation. Allow roughly a week per coat as a guide, and longer in the high rainfall and constant damp of the North West. We protect the work and control drying so the finish cures evenly rather than cracking or dusting.
We do. Lime repointing is a large part of our Runcorn workload — raking out hard cement pointing and replacing it with a softer, sacrificial lime mortar that protects the masonry face instead of eroding it.
We do. Runcorn is one of our core areas and we travel throughout Cheshire and the surrounding parts of North West England for lime plastering, lime render, lime pointing and heritage repair.
Our lime plastering, render and pointing teams also cover these towns and cities close to Runcorn in Cheshire and the wider North West England area.
Browse all areas we cover across the UK
Get a lime plastering quote in Runcorn