We provide conservation-grade lime plastering across Worcester, Worcestershire. Whether you are repairing damp internal walls in a soft red brick property, stripping failed cement render, or repointing stonework, our craftsmen work only in lime — the material Worcester's period buildings were originally constructed with.
Worcester's building stock reflects the history of West Midlands, and exposed timber frame and soft sandstone are widespread and easily damaged by cement. Applying gypsum or cement to these walls traps moisture; lime lets it evaporate freely, protecting the fabric of the building for decades.
Around Worcester you will find black-and-white timber-framed houses alongside later industrial-era brick terraces. Both were built with lime, and both suffer when a modern impermeable finish is applied over the top — the moisture has to go somewhere, and it goes into the masonry and the timbers.
Using lime in Worcester is a conservation requirement as often as a technical one. It keeps the property eligible for heritage consent, preserves original detailing, and gives a soft, hand-finished surface no modern board can replicate.
Every Worcester job begins with diagnosis: identifying where moisture is entering before any plaster goes on. We then remove failed material, prepare the soft red brick, and build the lime up in coats, allowing each one to cure before the next.
Because exposed timber frame and soft sandstone are widespread and easily damaged by cement, Worcester throws up a particular set of problems. These are representative examples of how we resolve them in lime.
black-and-white timber-framed house — Blown gypsum plaster and tide marks on the ground floor of a black-and-white timber-framed house in Worcestershire. We hacked off the gypsum, applied a haired lime base coat and a lime putty finish, and specified clay paint so the wall could keep drying.
industrial-era brick terrace — Peeling modern masonry paint on an industrial-era brick terrace in Worcestershire. The impermeable coating was removed, minor render defects were patched in lime, and the elevations were finished in several thin coats of limewash.
canal-side warehouse conversion — Salt-contaminated plaster around a reopened fireplace in a canal-side warehouse conversion in Worcester. We removed the affected plaster, applied a salt-tolerant lime build-up and finished flush with the surrounding original work.
Yes — stripping failed cement render and replacing it with a breathable lime render is one of the most common jobs we carry out in Worcester. It is usually the fastest way to resolve persistent damp in a solid-wall building.
Yes. We take samples of the surviving mortar or plaster from the oak timber frame with wattle panels first, then match aggregate, colour and texture so the repair blends into the original rather than patching over it.
Yes. We regularly work on listed and conservation-area properties across Worcestershire and can supply mix specifications and sample panels for Worcester conservation officers where consent is required.
Lime cures slowly by carbonation. Allow roughly a week per coat as a guide, and longer in the damp, sheltered inland Midlands climate. We protect the work and control drying so the finish cures evenly rather than cracking or dusting.
Our lime plastering, render and pointing teams also cover these towns and cities close to Worcester in Worcestershire and the wider West Midlands area.
Browse all areas we cover across the UK
Get a lime plastering quote in Worcester